HP Insight Remote Support 7.0.9 Installation and Configuration Guide

e. In the Domain field, type the domain name.
f. In the User field, type the username of the domain administrator.
g. In the Password field, type the domain administrator's password.
h. Click Add.
The domain and the administrator's user name appear in the table.
i. Make sure the Discover check box is selected for the domain.
3. Add local networks to be discovered. You can discover devices by typing local network information
and subnet information. Note that discovering a local network can take a long time for large
environments.
To discover devices by local network, complete the following steps:
a. In the main menu, select Discovery.
b. Click the Sources tab.
c. Click the Local Networks pane.
d. Click New. The Local Network dialog box appears.
e. Do the following:
o
In the Network Address field, type a network address.
o
In the Subnet Mask field, type the subnet mask.
f. Click Add.
HP Insight Remote Support 7.0.9:Installation and Configuration Guide Page 40 of 81
Chapter 3: Completing the Setup Wizards