HP Insight Remote Support 7.0.9 Installation and Configuration Guide
Credential Field Description
Use default Clear this check box if you do not want to use the default port number.
Type the appropriate port number in the Port field.
Named Credential If you have created a named credential for the device type, you can
select it here. Insight Remote Support populates the access fields
with the login details specified in the named credential.
By default, the protocol uses the Named Credential that is assigned to
the selected device. If no named protocols exist, then None is
selected in the Named Credential drop-down list.
Username Type the username used to access the device type.
Password Type the password used to access the device type.
Confirm Password Re-type the password you typed in the Password field.
File Upload Click the Browse button to locate the certificate and upload it.
Certificate Alias If the certificate you are identifying for access has an alias, type the
alias here.
5. After completing the fields, click Add.
The credential is added to the list of credentials for the protocol.
Note: Each protocol can have multiple credentials configured. Select a protocol in the
Select and Configure Protocol drop-down list to view the list of credentials for that protocol.
6. Repeat steps 1 - 5 to add additional protocol credentials.
7. To update or delete a protocol credential, select the credential in the table and modify the information
in the Existing Credential dialog box.
8. Click Next to continue to the next screen of the wizard.
Insight Remote Support saves the credential information.
Discovery Sources
On the Discovery Sources screen, configure which devices on your network you want discovered.
Device discovery identifies devices on your network to be monitored by Insight Remote Support.
There are three ways to tell Insight RS which devices on your network to discover, and they can be used
individually or in combination: IP addresses, Windows domains, and local networks.
Important: If you have more than 30 devices on your network, depending on your network
speed, it may take a considerable time to discover all of the devices at once. Unless you have a
very small network, HP advises that you specify discovery settings before starting device
discovery.
HP Insight Remote Support 7.0.9:Installation and Configuration Guide Page 38 of 81
Chapter 3: Completing the Setup Wizards