7.0.8 Insight Remote Support Release Notes

HP Insight Remote Support 7.0.8 Release Notes
8
Content Level Update 7.0.8.1
The following products are only support when the software package Content Level Update 7.0.8.1 has been installed. See
the Content Level Updates chapter below for details.
Table 4. New product support introduced with Content Level Update 7.0.8.1
HP ProLiant servers
 HP ProLiant MicroServer2 Gen8 servers
 HP ProLiant DL320e Gen8 v2 servers
 HP ProLiant DL360p Gen8 servers
 HP ProLiant DL380p Gen8 servers
 HP ProLiant BL460c Gen8 servers
 HP ProLiant ML310e Gen8 v2 servers
 HP ProLiant ML350p Gen8 servers
 HP ProLiant SL230 Gen8 servers
 HP ProLiant SL250 Gen8 servers
 HP ProLiant SL2500 Scalable System
 HP ProLiant t2500 Gen8 Chassis
 HP ProLiant SL210t Gen8 servers
 HP ProLiant WS460c Gen 8 servers
HP Storage
 HP Command View for Tape Libraries software version 3.7 support
 HP MSA/P2000
– HP MSA 2040 SAN Storage
– HP MSA 2040 SAS Storage
 HP StoreEasy (formerly Commercial NAS)
– HP StoreEasy 1x00 Storage
– HP StoreEasy 3x00 Storage
– HP StoreEasy 5x00 Storage
HP Networking
1
The following HP ComWare-based (A-Series or H3C/3COM) networking switches are now supported:
 HP 3100 v2 switch series
 HP 3600 v2 switch series
 HP 5820 switch series
 HP 5830 switch series
 HP 5900 AF switch series
 HP 5920 AF switch series
HP Networking
1
The following HP Provision-based (E-Series/ProCurve) networking switches are now supported:
 HP ProCurve 2510 switch series
 HP ProCurve 2512 Switch
 HP ProCurve 2524 Switch
 HP E2600-8-PoE Switch
 HP 2610 switch series
 HP 2650 switch series
 HP 2810 switch series
 HP ProCurve Switch 2824
 HP ProCurve Switch 2848
 HP 2900 switch series
 HP 3400 cl switch series
 HP 4200 vl switch series
 HP 5300xl switch series
 HP ProCurve 6108 Switch
 HP 6400 cl switch series
For details, please see the HP Networking Switches section below.
1
Switches configured to use the HP proprietary Intelligent Resilient Framework (IRF) technology or switch stacking capabilities are currently not supported. HP
Insight RS only supports standalone mode for these switches.