7.0.8 Insight Remote Support Quick Installation Guide

Fulfilling Pre-Installation System Requirements
2 FULFILLING PRE-INSTALLATION SYSTEM REQUIREMENTS
2.1 FULFILL HARDWARE REQUIREMENTS
Before installing Insight RS, complete the following hardware requirements:
Hardware Requirement Required/
Optional
Completed?
A supported 32-bit or 64-bit Microsoft® Windows® ProLiant server with a valid
warranty or contract. Refer to the HP Insight Remote Support Release Notes to make
sure your ProLiant server is supported as the Hosting Device.
Installation on a VMware guest is also supported.
Important: When running the Hosting Device in a virtual environment, add an extra
10% to the resources for each Virtual Machine added to the ProLiant.
Required
Memory requirements for managing 100 devices or less:
• Minimum 4 GB for new installations.
• Recommended 6 GB, 8 GB if using HP Systems Insight Manager (SIM).
Memory requirements for managing up to 500 devices:
• Minimum 6 GB for new installations.
• Recommended 8 GB, 10 GB if using HP SIM.
Memory requirements for managing up to 2,500 devices:
• Minimum 8 GB for new installations.
• Recommended 12 GB, 16 GB if using HP SIM.
Required
Free disk space requirements for managing 100 devices or less:
• 2 GB for installation.
• 4 GB for operation.
Free disk space requirements for managing up to 500 devices:
• 2 GB for installation.
• 8 GB for operation.
Free disk space requirements for managing up to 2,500 devices:
• 2 GB for installation.
• 28 GB for operation.
Required
HP Insight Remote Support: Quick Installation Guide Page 5 of 15