7.0.8 Insight Remote Support Monitored Devices Configuration Guide

Monitored Devices Configuration Guide
Chapter 11: Configuring Integrity HP-UX Servers
iv.
Start the cimom daemon:
# cimserver
6. In the Insight RS Console, add a WBEM certificate credential on the Discovery → Credentials tab.
a. From the Select and Configure Protocol drop-down list, select Web-Based Enterprise
Management (WBEM).
b. Click New. The New Credential dialog box appears.
c. Select Certificate Credential from the Type drop-down list.
d. Leave the File Upload field blank because the certificate is already in the certificate store and it
is identified by using the alias name.
e. Type the Certificate Alias of “jetty”, which is the alias given to the certificate when it was exported
above.
Discover the Device in the Insight RS Console
To discover the device from the Insight RS Console, complete the following steps:
1. In a web browser, log on to the Insight RS Console.
2. In the main menu, select Discovery and click the Sources tab.
3. Expand the IP Addresses section and add the IP address for your device:
a. Click New.
b. Select the Single Address, Address Range, or Address List option.
c. Type the IP address(es) of the devices to be discovered.
HP Insight Remote Support (7.0.8)Page 92 of 248