7.0.8 Insight Remote Support Monitored Devices Configuration Guide

Monitored Devices Configuration Guide
Chapter 11: Configuring Integrity HP-UX Servers
stable supported environment. The following table identifies the minimum required patches
(required if QPKBASE is not installed).
Note: Notes About the Following Table
l WBEM Services, Online Diagnostics, and SysMgmtWeb are available on the Operating
Environment (OE) media and can be selected for install during the SFM installation.
l The listed software versions are the minimum supported requirements. Newer versions are
supported unless otherwise noted.
l System Management Homepage (SMH), bundled in SysMgmtWeb, is optional, but it allows
you to use SFM’s EVWEB GUI component to view events handled by SFM on the host.
l The table lists items in the sequence in which they should be installed in case any of them
are missing and require upgrade or installation.
Required Software Version Required
HP-UX Operating Environment l September, 2004 11i v2 OE (minimum OE
release)
l May, 2005 11i v2 OE (required for vPars
enablement).
How to Download or Access Software: http://www.hp.com/go/hpux11ioe
Operating System Patch Requirements
Note: These six additional patches for
HP-UX 11i v2 are not part of the
Bundle11i and must be installed in
addition to it.
BUNDLE 11i patch bundle B.11.23.0409.3
(September, 2004):
l PHKL_36288 - 11.23 Cumulative diag2 driver
and vPars enablement (use in place of PHKL_
32653), requires a reboot
l PHKL_34795 - 11.23 Cumulative IPMI driver
patch, requires a reboot
l PHSS_37552 - 1.0 Aries cumulative patch
l PHSS_37947 - 1.0 linker + fdp cumulative
patch
l PHSS_35055 - aC++ Runtime (IA: A.06.10,
PA: A.03.71)
l PHSS_36345 - 11.23 Integrity Unwind Library
Table 11.2 Required Software Components for HP-UX 11i v2
HP Insight Remote Support (7.0.8)Page 80 of 248