7.0.8 Insight Remote Support Monitored Devices Configuration Guide

Monitored Devices Configuration Guide
Chapter 8: Configuring Integrity Windows 2003 Servers
Sending a WBEM Test Indication to Verify Connectivity
Use WBEM Providers to send WBEM Indications to verify connectivity.
1. In a web browser, access System Management Homepage (SMH) on the monitored device:
https://[ipaddress]:2381.
2. Log on using the administrator user name and password for the monitored device.
Note: If you are not prompted to log on, check the upper right corner of the SMH interface
and click the Sign In link. You will not have access to all relevant configuration options if
you are not logged in as an administrator for the monitored device.
3. In the top menu bar, click Settings.
4. If you chose to install WBEM with the Integrity Support Pack, it will be set as your Data Source. Click
the Send Test Indication option.
5. In the Send Test Indication screen, select an Event ID type and click Send.
HP Insight Remote Support (7.0.8)Page 71 of 248