7.0.8 Insight Remote Support Monitored Devices Configuration Guide

Monitored Devices Configuration Guide
Contents
Missing IP Address During Discovery 35
Warranty and Contract Discrepancy in Insight Online 36
Configuring ProLiant Windows Servers 37
Configuring ProLiant Windows Servers Using WMI 37
Fulfill Configuration Requirements 37
Install and Configure WMI 38
Install Service Pack for ProLiant 38
Install WMI 38
Install System Management Homepage 38
Disabling User Account Control in Windows 2008 39
Send a WBEM Test Indication to the Hosting Device 39
Viewing Test Events In the Insight RS Console 40
Troubleshooting 41
Device Health in Insight Remote Support 41
Configuring ProLiant Windows Servers Using SNMP 41
Fulfill Configuration Requirements 41
Install and Configure SNMP Agents 42
Install Service Pack for ProLiant 42
Install System Management Homepage 42
Configure SNMP 42
Send an SNMP Test Trap to the Hosting Device 47
Viewing Test Events In the Insight RS Console 47
Configuring ProLiant Linux Servers 49
Fulfill Configuration Requirements 49
Install SNMP Agents 49
Configure SNMP 50
Verify Connectivity by Sending an SNMP Test Trap to the Hosting Device 53
Viewing Test Events In the Insight RS Console 53
Configuring ProLiant VMware ESX Servers 54
Fulfill Configuration Requirements 54
Configure SNMP 54
Verify Connectivity by Sending an SNMP Test Trap to the Hosting Device 57
HP Insight Remote Support (7.0.8)Page 4 of 248