7.0.8 Insight Remote Support Monitored Devices Configuration Guide

Monitored Devices Configuration Guide
Chapter 2: Configuring ProLiant Gen8 Servers
Sending an Active Health System Report from Insight
Remote Support
1. Log on to the Insight RS Console.
2. Navigate to Collection Services → Collection Schedules.
3. In the List of Collection Schedules pane, select AHS Collection Schedule.
4. In the Schedule Information pane, click Run Now.
Insight Remote Support runs the schedule. You can view the results on the Basic Collection Results tab.
Maintenance
Set Maintenance Mode
Make sure to turn Maintenance Mode on when performing maintenance work on the ProLiant Gen8 server.
When in maintenance mode, any events or messages that are sent to Insight Remote Support are flagged
to indicate no action needs to be taken for the event.
To set maintenance mode, do the following:
1. In the navigation menu, click Remote Support → Service Events. The Service Events screen
displays.
2. In the Server Maintenance Mode section, click the Set Maintenance Mode option. The Expires in
drop-down list appears.
3. In the Expires in drop-down list, select the length of time you will work on the ProLiant Gen8 server.
HP Insight Remote Support (7.0.8)Page 34 of 248