7.0.8 Insight Remote Support Monitored Devices Configuration Guide

Monitored Devices Configuration Guide
Chapter 2: Configuring ProLiant Gen8 Servers
Note: Sending SNMP test traps from the iLO 4 web interface Administration → Management
page is not supported in Insight Remote Support. To send a test event, do so from the Remote
Support → Service Events page as shown below.
To send a test event, do the following:
1.
Log on to the iLO 4 web interface (https://<iLO hostname or IP address>).
2. In the navigation menu, click Remote Support → Service Events. The Service Events screen
appears.
3. Click Send Test Event. The following message appears:
Are you sure you want to send a test event?
4. Click OK to confirm that you want to send the test event. The following messages appear:
Test Service Event Transmission has been initiated
Service Event transmission in progress.
When the transmission is complete, the test event is listed in the Service Event Log and in the Insight
RS Console. If the test is successful, the Submit Status column displays the text No Error.
The Time Generated column in the Service Event Log shows the date and time based on the
configured iLO time zone.
HP Insight Remote Support (7.0.8)Page 31 of 248