7.0.8 Insight Remote Support Monitored Devices Configuration Guide

Monitored Devices Configuration Guide
Chapter 1: Understanding Monitored Devices Prerequisites
Hardware
Platform
Required
Protocols and
Components Notes
B-Series SAN
Switch
SNMPv1 or
SNMPv2
See "Configuring StoreFabric B-Series Switches" on page
202.
C-Series SAN
Switch
SNMPv1 or
SNMPv2
See "Configuring StoreFabric C-Series Switches" on page
208.
H-Series SAN
Switch
SNMPv1 or
SNMPv2
See "Configuring StoreFabric H-Series Switches" on page
211.
Networking Switches
Provision-based
Switches
(formerly E-
Series/ProCurve)
SNMPv1 and
Telnet or SSH
See "Configuring Provision-based Networking Switches" on
page 213.
ComWare-based
Switches
(formerly A-Series
or H3C/3Com)
SNMPv1 See "Configuring ComWare-based Networking Switches" on
page 219.
HPSolutions
E5000 Messaging
Systems
SNMP or WMI These devices should be configured the same as a Windows
ProLiant server.
See "Configuring ProLiant Windows Servers" on page 37.
Power and Cooling Devices
HP Rack-
mountable and
Tower UPS
SNMPv1 Configuration collections are not supported.
If your UPSuses a Management Module, see "Configuring
UPS Management Modules" on page 223.
If your UPSuses a Network Module, see "Configuring UPS
Network Modules" on page 225.
HP Modular
Cooling System
SNMPv1 Configuration collections are not supported.
See "Configuring Modular Cooling Systems" on page 229.
Printers
LaserJet and
OfficeJet
SNMPv1,
SNMPv2, or
SNMPv3 and
Printer
Credentials
See "Configuring Printers" on page 232.
HP Insight Remote Support (7.0.8)Page 24 of 248