7.0.8 Insight Remote Support Monitored Devices Configuration Guide

Monitored Devices Configuration Guide
Chapter 1: Understanding Monitored Devices Prerequisites
Hardware
Platform
Required
Protocols and
Components Notes
HP MSA23xx G2 SNMPv1 and
WBEM
Install the SMI-S Proxy Provider on the host server and not
the MSA itself.
See "Configuring MSA23xx G2 Modular Smart Arrays" on
page 171.
HP P2000 G3 SNMPv1 and
WBEM
See "Configuring P2000 G3 Modular Smart Arrays" on page
176.
HP StoreEasy
Storage
(formerly
Commercial
Network Attached
Storage (NAS))
WMI See "Configuring StoreEasy Storage Systems" on page 180.
HP StoreAll
Network Storage
Systems
SNMPv1 See "Configuring StoreAll Network Storage Systems" on
page 184.
Virtual Library
System (VLS)
SNMPv1 Configuration collections are not available except when the
VLS is part of a SAN collection. (See Required Monitored
Device Communication Protocols and Components for SAN
Collections.)
See "Configuring Virtual Library Systems" on page 188.
HP StoreOnce
Backup (D2D)
System
SNMPv1 Configuration collections are not supported.
See "Configuring StoreOnce Backup (D2D) Systems" on
page 190.
HP StoreEver Tape Libraries
Modular Systems
Library (MSL)
SNMPv1 See "Configuring StoreEver Tape Libraries" on page 193.
Enterprise
Systems Library
(ESL) E-series
SNMPv1 and
WBEM
WBEMis supplied through Command View for Tape
Libraries, installed on the server managing the tape libraries.
See "Configuring StoreEver Tape Libraries" on page 193.
Enterprise Modular
Library (EML)
SNMPv1 and
WBEM
WBEMis supplied through Command View for Tape
Libraries, installed on the server managing the tape libraries.
See "Configuring StoreEver Tape Libraries" on page 193.
StoreFabric SAN Switches
HP Insight Remote Support (7.0.8)Page 23 of 248