7.0.8 Insight Remote Support Monitored Devices Configuration Guide

Monitored Devices Configuration Guide
Chapter 1: Understanding Monitored Devices Prerequisites
Hardware
Platform
Required
Protocols and
Components Notes
Integrity
BladeSystem
Servers
(See Notes.) Supported Integrity BladeSystem servers are monitored
independent of the c-Class Enclosure in which they are
installed. Integrity BladeSystem servers can be configured
using the instructions for Integrity servers.
For configuration details, see the Integrity server section that
corresponds to the operating system installed on the Integrity
BladeSystem server.
Storage Blades (See Notes.) Configuration collections are not supported.
Storage Blades are monitored through the Storage Agents
installed on the partner server blade. The partner server blade
is the adjacent server blade connected directly to the storage
blade.
Tape Blades (See Notes.) Configuration collections are not supported.
Tape Blades are monitored through the Storage Agents
installed on the partner server blade. The partner server blade
is the adjacent server blade connected directly to the tape
blade.
Disk Arrays
P6000 and
Enterprise Virtual
Array
ELMC and
HP P6000
Command View
See "Configuring P6000 and Enterprise Virtual Arrays" on
page 133.
For configuring with Server Based Management, see
"Configuring P6000 and Enterprise Virtual Arrays Using
Server Based Management" on page 133.
For configuring with Array Based Management, see
"Configuring P6000 and Enterprise Virtual Arrays Using Array
Based Management" on page 145.
HP StoreVirtual
P4000 Storage
Systems
SNMPv1 and
P4000 SAN
Solution (SAN/iQ)
See "Configuring StoreVirtual P4000 Storage Systems" on
page 148.
HP MSA15xx SNMPv1 See "Configuring MSA15xx Modular Smart Arrays" on page
164.
HP MSA2xxx G1 SNMPv1 Configuration collections are not supported.
See "Configuring MSA2xxx G1 Modular Smart Arrays" on
page 167.
HP Insight Remote Support (7.0.8)Page 22 of 248