7.0.8 Insight Remote Support Monitored Devices Configuration Guide

Monitored Devices Configuration Guide
Chapter 32: Configuring Provision-based Networking Switches
1. In the Insight RS Console, add a SSH certificate credential on the Discovery → Credentials tab.
a. Select Secure Shell (SSH) from the Select and Configure Protocol drop-down list and click
New.
b. Select Certificate Credential from the Type drop-down list.
c.
Browse to the private key file, PCPrivate.pem.
d. Type the Certificate Alias. The alias will take the form of switchname-manager. The SSH protocol
uses the -manager portion of the alias as the user name during log on.
2. Click Add.
Discover the Device in the Insight RS Console
To discover the device from the Insight RS Console, complete the following steps:
1. In a web browser, log on to the Insight RS Console.
2. In the main menu, select Discovery and click the Sources tab.
3. Expand the IP Addresses section and add the IP address for your device:
a. Click New.
b. Select the Single Address, Address Range, or Address List option.
c. Type the IP address(es) of the devices to be discovered.
d. Click Add.
4. Click Start Discovery.
HP Insight Remote Support (7.0.8)Page 218 of 248