7.0.8 Insight Remote Support Monitored Devices Configuration Guide

Monitored Devices Configuration Guide
Chapter 32: Configuring Provision-based Networking Switches
5. Enable the TFTP client:
tftp client
6. Move the public key to the switch:
copy tftp pub-key-file <tftp_server_ip> <public_key_file> manager
7. Enable public key authentication:
aaa authentication ssh login public-key
8. Enable user/password authentication:
aaa authentication ssh enable local
9. Write the configuration and public key to memory:
wr mem
Add the SSH Protocol Credential to the Insight RS Console
1. In the Insight RS Console, add a SSH certificate credential on the Discovery → Credentials tab.
a. Select Secure Shell (SSH) from the Select and Configure Protocol drop-down list and click
New.
b. Select Certificate Credential from the Type drop-down list.
c. Leave the File Upload field blank because the certificate is already in the certificate store and it
is identified by using the alias name.
d. Type the Certificate Alias of “jetty-manager”, which is the alias given to the certificate when it was
exported above.
2. Click Add.
HP Insight Remote Support (7.0.8)Page 216 of 248