7.0.8 Insight Remote Support Monitored Devices Configuration Guide

Monitored Devices Configuration Guide
Chapter 1: Understanding Monitored Devices Prerequisites
Hardware
Platform
Required
Protocols and
Components Notes
OpenVMS on
Integrity
WBEM and
ELMC
Must install the OpenVMS WBEM provider.
Configuration collections and discovery only work when the
WBEM providers are installed and the credentials are
properly configured.
See "Configuring OpenVMS Servers" on page 99.
OpenVMS on
AlphaServer
SNMPv1 and
ELMC
Configuration collections are not available except when the
OpenVMS server is part of a SAN collection. (See Required
Monitored Device Communication Protocols and
Components for SAN Collections.)
See "Configuring OpenVMS Servers" on page 99.
Tru64 UNIX on
AlphaServer
SNMPv1 and
ELMC
Configuration collections are not supported.
See "Configuring Tru64 UNIX Servers" on page 107.
Multivendor
IBM BladeCenter
chassis and
BladeCenter
Servers
IBM System x
SNMPv1 Configuration collections are not supported.
See "Configuring IBM Servers" on page 113.
Dell PowerEdge SNMPv1 Configuration collections are not supported.
See "Configuring Dell PowerEdge Servers" on page 121.
BladeSystems
BladeSystem c-
Class Enclosure
OA or
SNMPv1
See "Configuring BladeSystem c-Class Enclosures" on page
126.
For configuring the OA, see "Configuring BladeSystem c-
Class Enclosures Through the OA" on page 126.
For configuring using SNMP, see "Configuring BladeSystem
c-Class Enclosures Using SNMP" on page 129.
ProLiant
BladeSystem
Servers
(See Notes.) Supported ProLiant BladeSystem servers are monitored
independent of the c-Class Enclosure in which they are
installed. ProLiant BladeSystem servers can be configured
using the instructions for ProLiant servers.
For configuration details, see the ProLiant server section that
corresponds to the operating system installed on the ProLiant
BladeSystem server.
HP Insight Remote Support (7.0.8)Page 21 of 248