7.0.8 Insight Remote Support Monitored Devices Configuration Guide

Monitored Devices Configuration Guide
Chapter 1: Understanding Monitored Devices Prerequisites
Hardware
Platform
Required
Protocols and
Components Notes
ESX on ProLiant SNMPv1,
SNMPv2 or
SNMPv3
See "Configuring ProLiant VMware ESX Servers" on page
54.
ESXi on ProLiant WBEM See "Configuring ProLiant VMware ESXi Servers" on page
58.
Citrix Xen Server
on ProLiant
SNMPv1,
SNMPv2 or
SNMPv3
See "Configuring ProLiant Citrix Xen Servers" on page 61.
Hyper-V on
ProLiant
SNMP or WMI Configuration collections are not supported.
Hyper-V is a role on a Windows server, so you should follow
the configuration instructions for a ProLiant Windows server.
See "Configuring ProLiant Windows Servers" on page 37.
Windows 2003 on
Integrity
SNMPv1 and
ELMC and
WMI
Must install the Integrity Support Pack and all providers that
ship with it.
See "Configuring Integrity Windows 2003 Servers" on page
66.
Windows 2008 on
Integrity
WMI Must install the Integrity Support Pack and all providers that
ship with it.
See "Configuring Integrity Windows 2008 Servers" on page
73.
Linux on Integrity WBEM Configuration collections are not supported.
See "Configuring Integrity Linux Servers" on page 76.
HP-UX on
Integrity
WBEM Install the proper WBEM providers on HP-UX. These
generally are part of the feature set of HP-UX and will update
through patches and software updates on the device as
appropriate.
See "Configuring Integrity HP-UX Servers" on page 78.
Integrity
Superdome 2
Onboard
Administrator
WBEM and
WS-Man and
HTTPS
Discovery uses WS-Man and collections use HTTPS. The
OA is managed using WS-Man, but the Superdome 2
partitions are managed using WBEM.
See "Configuring Integrity Superdome 2 Servers" on page 94.
HP Insight Remote Support (7.0.8)Page 20 of 248