7.0.8 Insight Remote Support Monitored Devices Configuration Guide

Monitored Devices Configuration Guide
Chapter 28: Configuring StoreEver Tape Libraries
4. Verify the SNMP Enabled check box is selected.
5. In the IPv4 Target address field type the Hosting Device IP address or FQDN.
6. Verify SNMPv1 is the version selected.
7. In the SNMP Trap Notification Filter, select Critical and Warning Events as the filter level.
8. Click Submit.
Configure Modular Systems Library MSL6480
To allow Insight RS to register for your Modular Systems Library (MSL) MSL6480 library health events
using SNMP, complete the following steps:
1.
Log on to the Log on to the MSL6480 web interface as Administrator.
2. Click Configuration.
3. Click the Network Management → SNMP tab.
HP Insight Remote Support (7.0.8)Page 199 of 248