7.0.8 Insight Remote Support Monitored Devices Configuration Guide

Monitored Devices Configuration Guide
Chapter 26: Configuring Virtual Library Systems
6.
The trap version is 1.
7. Click Add.
Discover the Device in the Insight RS Console
To discover the device from the Insight RS Console, complete the following steps:
1. In a web browser, log on to the Insight RS Console.
2. In the main menu, select Discovery and click the Sources tab.
3. Expand the IP Addresses section and add the IP address for your device:
a. Click New.
b. Select the Single Address, Address Range, or Address List option.
c. Type the IP address(es) of the devices to be discovered.
d. Click Add.
4. Click Start Discovery.
Send a Text Event to Verify the Configuration
Note: Do not pull a redundant FRU to test the configuration.
If you have the latest VLS firmware and the latest version of Command View VLS, click the Test SNMP
button on the Command View VLS SNMP configuration page to perform an end-to-end test. This test
event will not result in a case being created at HP, but it will create a local email notification to confirm that
the VLS SNMP and Insight Remote Support is configured correctly.
HP Insight Remote Support (7.0.8)Page 189 of 248