7.0.8 Insight Remote Support Monitored Devices Configuration Guide

Monitored Devices Configuration Guide
Chapter 22: Configuring MSA23xx G2 Modular Smart Arrays
community string or use a nonstandard port, you must create an SNMPv1 protocol credential in the Insight
RS Console.
To configure SNMPv1 in the Insight RS Console, complete the following steps:
1. In a web browser, log on to the Insight RS Console.
2. In the main menu, select Discovery and click the Credentials tab.
3. From the Select and Configure Protocol drop-down list, select Simple Network Management
Protocol Version 1.
4. Click New. The New Credential dialog box appears.
5. Enter the Community String you have configured on your device.
6. Click Add.
Insight RS creates the protocol credential and it appears in the credentials table.
Create a WBEM Protocol Credential in Insight RS
To configure WBEM in the Insight RS Console, complete the following steps:
1. In a web browser, log on to the Insight RS Console.
2. In the main menu, select Discovery and click the Credentials tab.
3. From the Select and Configure Protocol drop-down list, select Web-Based Enterprise
Management (WBEM).
4. Click New. The New Credential dialog box appears.
5. Enter the Username and Password you have set up for your MSA23xx in the SMI-S Proxy Provider
software.
6. Click Add.
Insight RS creates the protocol credential and it appears in the credentials table.
Discover the Device in the Insight RS Console
To discover the device from the Insight RS Console, complete the following steps:
1. In a web browser, log on to the Insight RS Console.
2. In the Main Menu, select Discovery and click the Sources tab.
3. Expand the IP Addresses section and add the IP address to be discovered.
When discovering the MSA23xx G2, add the IP address of each MSA23xx G2 as well as the ProLiant
server running the SMI-S Proxy Provider software. This ensures that the necessary event and
collection services are configured.
a. Click New.
b. Select the Single Address, Address Range, or Address List option.
c. Type the IP address(es) of the ProLiant server running the SMI-S Proxy Provider software and
HP Insight Remote Support (7.0.8)Page 174 of 248