7.0.8 Insight Remote Support Monitored Devices Configuration Guide

Monitored Devices Configuration Guide
Chapter 18: Configuring P6000 and Enterprise Virtual Arrays
4. Copy the appropriate Windows x86/x64 ELMC software package into a temporary directory on the
P6000 Command View server.
5. Double-click the installer file to begin the install process. The kit will install and finish with no user
prompting. No user configuration input is required to install the ELMC software package.
Creating P6000 Command View Named Credentials
To create a Named Credential for every P6000 Command View instance to be monitored, complete the
following steps:
1. In the Insight RS Console, navigate to Company Information → Named Credentials.
2. Click Add New Credential.
3. Type a Credential Name.
4. In the Protocol drop-down list, select HP P6000 Command View.
5. Type the Username and Password for the P6000 Command View instance.
6. Click Save Info.
HP recommends also creating Named Credentials for the server that the P6000 Command View software
is running on.
Create the ELMC Protocol in the Insight RS Console
To configure ELMC in the Insight RS Console, complete the following steps:
1. In a web browser, log on to the Insight RS Console.
2. In the main menu, select Discovery and click the Credentials tab.
3. From the Select and Configure Protocol drop-down list, select Event Log Monitoring Collector
(ELMC).
4. Click New. The New Credential dialog box appears.
Insight RS creates the protocol credential and it appears in the credentials table.
Discovering the EVAs
An EVA is not discovered directly. The EVA is located when discovering the P6000 Command View
server that is managing the EVA.
Important: When a new EVA array is added to an Insight RS environment that is already
configured, a manual Discovery of the server running P6000 Command View that is managing
the new array is required in order to detect the new EVA's warranty and contract information.
To configure the Discovery settings and discover the EVAs, complete the following steps:
1. In the Insight RS Console, navigate to Discovery → Credentials.
2. Create discovery protocol credentials for each Named Credential created earlier.
HP Insight Remote Support (7.0.8)Page 142 of 248