7.0.8 Insight Remote Support Monitored Devices Configuration Guide
Monitored Devices Configuration Guide
Chapter 18: Configuring P6000 and Enterprise Virtual Arrays
The following example shows the complete file, with port number 60000 used as the HTTPS port for
SMI-S:
<?xml version="1.0" encoding="UTF-8"?>
<wbemportlist>
<port id="5989" protocol="https">
<cimnamespacelist>
<cimnamespace name="root/cimv2"/>
<cimnamespace name="vmware/esxv2"/>
<cimnamespace name="root/hpq"/>
</cimnamespacelist>
<interopnamespacelist>
<interopnamespace name="root/pg_interop"/>
<interopnamespace name="root"/>
<interopnamespace name="root/emulex"/>
<interopnamespace name="root/qlogic"/>
<interopnamespace name="root/ibm"/>
<interopnamespace name="root/emc"/>
<interopnamespace name="root/smis/current"/>
<interopnamespace name="root/hitachi/dm51"/>
<interopnamespace name="interop"/>
<interopnamespace name="root/interop"/>
<interopnamespace name="root/switch"/>
<interopnamespace name="root/cimv2"/>
</interopnamespacelist>
</port>
<port id="60000" protocol="https">
<interopnamespacelist>
<interopnamespace name="interop"/>
</interopnamespacelist>
</port>
</wbemportlist>
4. Save the file.
5. Restart the HP SIM service.
6. Select Options → Identify Systems to re-identify all WBEM/WMI systems in HP SIM to correct the
port reference.
Installing and Configuring P6000 Command View After HP SIM
The P6000 Command View installation kit includes SMI-S as a component. At installation time, SMI-S
assigns the following as default ports if they are available:
l HTTP port=5988
l HTTPS port=5989
If one or both of these ports are in use, the installation provides an additional configuration screen on which
you can change the port numbers. The SMI-S installer suggests port 60000 if that port is not in use. SMI-S
HP Insight Remote Support (7.0.8)Page 139 of 248