7.0.8 Insight Remote Support Monitored Devices Configuration Guide

Monitored Devices Configuration Guide
Chapter 16: Configuring Dell PowerEdge Servers
5. Select the Send authentication trap check box.
6. Click the Accept SNMP packets from any host option.
7. Click OK to save the settings.
Install and Configure SNMP
Dell OpenManage Server Administrator must be installed on the Dell PowerEdge server and SNMP
service must be configured.
On a Windows 2008 and 2008 R2 server the solution was tested with Dell OpenManage Server
Administrator version 6.2.0.
HP recommends installing the latest version of Dell OpenManage Server Administrator.
Installing Dell OpenManage Server Administrator
Download and install Dell OpenManage Server Administrator software. To download the software, go to:
http://content.dell.com/us/en/enterprise/d/solutions/openmanage-server-administrator.
Note: You can verify the device driver under Windows by right-clicking My Computer,
selecting Manage, and then clicking Device Manager.
HP Insight Remote Support (7.0.8)Page 123 of 248