7.0.8 Insight Remote Support Monitored Devices Configuration Guide

Monitored Devices Configuration Guide
Chapter 15: Configuring IBM Servers
4. On the Remote Alert Recipient page:
a. From the Status drop-down list, select Enabled.
b. In the Name field, type a Remote Alert Recipient name. For example: Remote Alert Recipient 1
c. From the Notification method drop-down list, select SNMPover LAN.
d. In the IP address or host name field, type the Hosting Device IP address.
e. Optional: In the E-mail address field, type an e-mail address, if you want to be notified about alerts
by e-mail
5. Select Save.The Alerts page appears. The saved Remote Alert Recipient now appears on the Alerts
page of the BladeCenter Management Module.
6. On the Alerts page scroll down to the Monitored Alerts section.
7. Select the following:
a. All Critical Alerts
b. From Warning Alerts:
i. Single Chassis Cooling Device (Blower) failure
ii. Temperature
iii. Voltage
c. From System Alerts:
HP Insight Remote Support (7.0.8)Page 117 of 248