7.0.8 Insight Remote Support Monitored Devices Configuration Guide

Monitored Devices Configuration Guide
Chapter 15: Configuring IBM Servers
1. To configure the service processor’s trap destination use the Management Processor
Assistant task in the IBM Director console.
2. Add the IP address of the Hosting Device as a trap destination.
3. Restart the service processor.
Configuring the Management Module of the IBM
BladeCenter® Chassis
1. Login into to the BladeCenter Management Module web page.
2. Select Alerts in the MM Control section of the left menu. The Alerts page appears.
3. Select one of the unused items from the Name column. The Remote Alert Recipient page appears.
HP Insight Remote Support (7.0.8)Page 116 of 248