7.0.8 Insight Remote Support Installation and Configuration Guide

Installation and Configuration Guide
Chapter 3: Completing the Setup Wizards
c. Do one of the following:
o
To discover a single monitored device, type the device's IP address in the Address field.
o
To discover a range of devices, select the Address Range option. In the Start Address field,
type the IP address of the first device in the range. In the End Address field, type the IP
address of the last device in the range.
o
To discover a list of devices, select the Address List option. In the Comma-Separated List
box, type the IP addresses of the devices separated by commas.
d. Click Add.
The IP address or addresses appear in the table. IP address ranges appear in the Start Address
and End Address columns. Single IP addresses display only in the Start Address column.
2. Add Windows domains to be discovered. You can discover devices by typing a Windows domain
name and log on credentials.
To discover devices by Windows domain, complete the following steps:
a. In the Main Menu, select Discovery.
b. Click the Sources tab.
c. Click the Windows Domains pane.
d. Click New. The Windows Domain dialog box appears.
e. In the Domain field, type the domain name.
f. In the User field, type the username of the domain administrator.
HP Insight Remote Support (7.0.8)Page 40 of 80