A.05.80 HP Insight Remote Support Advanced Managed Systems Configuration Guide (June 2013)

Managed Systems Configuration Guide
Chapter 12: HP-UX Server Configuration
Events in WBEM are called indications. Before an indication can be reported to a client system (for
example, the CMS), the client system must first subscribe to the event. An event subscription tells the
managed system’s Common Information Model Object Manager (CIMOM) the CMS is interested in
receiving indications from that managed system. When the CIMOM receives an indication from an
indication provider, it sends the indication to those clients that previously subscribed to receive them.
WEBES on the CMS subscribes to those indications. Once the subscription is completed, indications are
delivered to WEBES on the CMS as they occur. The following diagram provides a simplified overview of
the event (indication) subscription and delivery process.
More information about SFM and providers can be found in the OE/AR Depot Information for HP-UX
WBEM Providers, available at http://h10018.www1.hp.com/wwsolutions/misc/hpsim-
helpfiles/OEARInformation.pdf.
Verifying System Fault Management is
Operational
To verify the System Fault Management (SFM) component is operational on a HP-UX managed system,
complete the following steps:
1. Run the following command to verify the HP WBEM Services for HP-UX component is installed:
# swlist | grep –i WBEM
The output should look similar to the following:
HP Insight Remote Support Advanced (A.05.80)Page 78 of 204