A.05.80 HP Insight Remote Support Advanced Managed Systems Configuration Guide (June 2013)

Managed Systems Configuration Guide
Chapter 7: ProLiant c-Class BladeSystem Enclosure Configuration
8. Under the Contract and Warranty Information section of the page, add or update the HP SIM
Asset Information as necessary.
n Customer-Entered serial number – If the serial number Discovered by HP SIM (near the top of
the System Information screen) is correct, then no change is necessary. If it is blank or incorrect,
provide the correct serial number for this system in the Customer-Entered serial number field in
the Contract and Warranty section of the screen.
n Customer-Entered product number – If the Product Number has been Discovered by HP SIM
and is correct, then no change is necessary. If it is blank or incorrect (near the top of the System
Information screen), then provide the correct product number for this system in the Customer-
Entered product number field in the Contract and Warranty section of the screen.
n System Country code – This is required for the location where the support contract for this
system or enterprise was originated. Verify that the correct Country Code is selected.
n Entitlement type – The contract type and is one of the following:
HP Insight Remote Support Advanced (A.05.80)Page 52 of 204