A.05.80 HP Insight Remote Support Advanced Managed Systems Configuration Guide (June 2013)

Managed Systems Configuration Guide
Chapter 17: P4000 Storage Systems Migration Procedure
c. Click Synchronize RSE and wait for the task to complete. Once the Synchronize RSE task
completes then proceed to the next step.
Note: You do not need to select any devices before running the Synchronize RSE task
because it runs against all devices in the Entitlement list.
d. Select each new P4000 Storage System(s) with check box on left of Remote Support System
List screen.
e. Select Entitle Checked from the Action List drop-down list at the bottom of the screen. Select
the Run Action button, and once the progress shows as complete, select the Refresh button.
The node selected should show all green checks in the status fields on the left.
Important: You will need to fix any status items that are not green before going to the next
steps.
Once you complete these tasks, each the node should be listed in the HP SIM left panel under
Insight Remote Support Services, System is Remote Support Eligible and System is Remote
Support Enabled. This list can take a few minutes to update.
Repeat steps 7 and 8 for each new P4000 Storage System added to the Remote Support eligible
systems list.
9. From HP SIM, add the P4000 Storage System collection credentials to Remote Support as follows:
a. Options → Remote Support Configuration and Services.
b. Select the Storage Services tab and then select the P4000 Family Configuration Collections
tab.
c. Select New Credential Group button.
HP Insight Remote Support Advanced (A.05.80)Page 153 of 204