A.05.70 HP Insight Remote Support Advanced Release Notes (June 2012, 5900- 2129)
59
HP E3500-48 Switches
HP E3500-24 Switches
HP E2915-8G-PoE Switches
HP E2910al-48G-PoE+ Switches
HP E2910al-24G-PoE+ Switches
HP E2910al-48G Switches
HP E2910al-24G Switches
Software Prerequisites:
HP Systems Insight Manager (HP SIM) 6.2 or higher
NOTE: For HP SIM 6.2, you also need to install Hotfix Update Kit for HP SIM 6.2 - MS Windows
for x86. This hotfix update kit can be downloaded from the following web site:
http://h18013.www1.hp.com/products/servers/management/hpsim/dl_windows62.html#hotfix
NOTE: HP E-Series switches require SNMP for discovery and remote monitoring. These devices
ship with SNMP installed and enabled so that no additional configuration is needed.
NOTE: For configuration collections, please ensure that either TELNET or SSH service is enabled
TELNET is enabled on HP E-Series Switches (formerly known as ProCurve devices) by default. If
you prefer to use SSH, you will need to enable it. For instructions, see chapter 20 of the HP
Insight Remote Support Advanced A.05.60 Managed System Configuration Guide at
www.hp.com/go/insightremoteadvanced-docs.
HP A-Series switches (formerly known as H3C/3Com)
Current product name
Old product name
HP 5120-16G SI Switch
S5120-20P-SI L2, 16GE Plus 4SFP
HP 5120-24G SI Switch
S5120-28P-SI 24GE Plus 4 SFP
HP 5120-48G SI Switch
HP A5120-48G SI Switch
S5120-52P-SI 48GE Plus 4 SFP
HP A5120-24G EI Switch
S5120-24P-EI 24GE Plus 4ComboSFP
HP A5120-48G EI Switch
S5120-48P-EI 48GE Plus 4ComboSFP
HP A5120-24G EI Switch with 2 Interface Slots
S5120-28C-EI 24GE Plus 4Combo Plus 2Slt
HP A5120-48G EI Switch with 2 Interface Slots
S5120-52C-EI 48GE Plus 4Combo Plus 2Slt
HP A5120-24G-PoE EI 2-slot Switch
S5120-28C-PWR-EI 24G Plus 4C Plus 2S Plus POE
HP A5120-48G-PoE EI 2-slot Switch
S5120-52C-PWR-EI 48G Plus 4C Plus 2S Plus POE
HP 7510 Switch Chassis
HP A7510 Switch Chassis
H3C S7510E Chassis w/ fans
HP 7510 Switch Chassis
HP A7510 Switch Chassis
H3C S7510E Ethernet Switch Chassis with Fan