A.05.70 HP Insight Remote Support Advanced Operations Guide (October 2011, 5900-1727)

NOTE: If you are adding multiple managed systems, please consult the HP Insight Remote Support Advanced
Central Management Server Configuration Guide .
1.3 Modifying WBEM Credentials for Existing Managed Systems
When monitoring managed system using WBEM credentials, if and when you change the
username/password, you MUST modify those credentials in HP SIM on the CMS to continue monitoring
your managed system.
Complete the following steps to configure and apply the appropriate WBEM credentials for your managed
systems:
1. In the HP SIM User Interface, select Options → Protocol Setting → Global Protocol Settings.
2. Verify that the Enable WBEM box is checked, and then click the Global Credentials link to go to that
screen.
3. In the Global Credentials screen add all the WBEM username and password values required to
connect to the WBEM Providers installed on the managed servers and all the SNMP community strings
needed to connect to the SNMP Agents installed on the managed servers to be monitored. You may
enter as many WBEM username and password combinations and as many SNMP community strings
as needed. Then, click OK.
18 Overview