A.05.70 HP Insight Remote Support Advanced Managed Systems Configuration Guide (October 2011, 5900-1726)

Managed Systems Configuration Guide
Chapter 11: Integrity Superdome 2 Server Configuration
a. Connect a browser to HP SIM, log on and browse to Options → Discovery.
b. Click New to create a discovery task for the Superdome 2, and enter the IP addresses of the
partitions and of both the Active and Standby OA.
c. Click Credentials and enter the sign-in credentials that will be used to connect to the HP-UX
Operating System running on the partitions. Add another entry for the sign-in credentials that will
be used to connect to the Superdome 2 OAs.
d. Click OK and then Save to exit from the discovery task configuration process.
e. Click Run Now to start discovery.
f. Verify that the discovery process completed without errors. The WS-Man identification process
and the “Resolving DNS names” process step must execute without errors.
HP SIM will use the information it collects from the partitions to build the association tables and
create entries for both the Active and Standby OAs and for the complex. Discovery of the OAs also
enables HP SIM to collect additional information about the enclosure and rack.
5. After discovery completes, click the All Systems link in HP SIM, locate and click the System Name
link for the Active Superdome 2 OA.
In the Product Description section, verify the fields populate with these values:
n System Type – Management Processor
n System Subtype – HP Integrity Superdome 2
n Product Model – Superdome 2 Onboard Administrator
n OS Name – Embedded
n OS Type – Embedded
6. In the Entitlement Information section, verify the fields populate with these values:
n Customer-Entered serial number – The serial number of the complex reported by the OA in Step
2 of this section.
Note: This field populates automatically after HP SIM discovers the OA and is overwritten by
manual data entry. Do not overwrite this field with new information in the System Properties
page.
The complex serial number value is added here because HP SIM populates the serial number field
in the Product Description section with the OA module’s serial number and that serial number
cannot be used for service entitlement verification. The complex serial number entered here is
used instead by the Remote Support Client for service entitlement verification.
HP Insight Remote Support Advanced (A.05.70)Page 63 of 199