A.05.70 HP Insight Remote Support Advanced Managed Systems Configuration Guide (October 2011, 5900-1726)

Managed Systems Configuration Guide
Chapter 19: Modular Smart Array Configuration
6. Click Apply to commit your changes.
7. Exit the utility and confirm that your 23xx has been discovered by HP SIM on the CMS.
Configuring a Host-based MSA
A host-based MSA is connected to a host server and managed through a Smart Array Controller. Before
you can monitor a host-based MSA, you must:
l Verify the MSA is supported by checking the Insight Remote Support Advanced Release Notes.
l Verify that the host system is configured as a managed system as directed in its corresponding chapter
of this document.
If the MSA has been configured correctly according to manufacturer's instructions, it should be able to
communicate with the host. If the host has been properly configured as a managed system as directed in
this document, then the host/managed system will be able to communicate the MSA event information to
the CMS for remote support.
HP Insight Remote Support Advanced (A.05.70)Page 164 of 199