A.05.70 HP Insight Remote Support Advanced Managed Systems Configuration Guide (October 2011, 5900-1726)

Managed Systems Configuration Guide
Chapter 19: Modular Smart Array Configuration
Important: SNMP should be active by default, but if it for any reason it is not, Insight Remote
Support Advanced will not be supported. It is critical to verify SNMP is active.
4. From the menu select Configuration → Services → SNMP.
5. On the Configure SNMP Notification page modify the SNMP settings to include the CMS as an
SNMP Trap Host and select your Notification Level from the drop-down list (the informational levels
is recommended).
HP Insight Remote Support Advanced (A.05.70)Page 163 of 199