A.05.70 HP Insight Remote Support Advanced Managed Systems Configuration Guide (October 2011, 5900-1726)

Managed Systems Configuration Guide
Chapter 17: P4000 Storage Systems Migration Procedure
text if the connection failed.
Important: Only SAN/iQ nodes in a Management Group can be monitored with Insight
Remote Support version A.05.70. Each node must be in a Management Group to be
monitored by Insight Remote Support, but they don't need to be configured in a cluster or
have a storage manager running to be monitored.
g. Click Save All Changes.
There is no need to repeat this step for each P4000 Storage System if the new P4000 Storage
System(s) have the same Management Group credentials already added to Insight Remote Support.
10. Add each device to the daily Collection Schedule. Select Tasks & Logs → View All Scheduled
Tasks. Select the P4000 Family Configuration Collection radio button and click the Edit button.
Select the Add Targets button, select your systems, and then click the Run Now button.
11. Configure Insight Remote Support Advanced so that the System Health Check task does not run at
the same time as the P4000 daily collection task.
a. In HP SIM, check and set the System Health Check schedule through Options → Remote
Support Configuration and Services. On the System Health tab, select Modify Schedule
from the Action List dropdown. Click Run Action to see the current schedule.
b. To view the P4000 Family Configuration Collection schedule, select Tasks & Logs → View All
Scheduled Tasks, select the P4000 Family Configuration Collection item, click Edit and then
click Schedule. This task runs daily by default.
c. The P4000 Family Configuration Collection takes longer to run than the System Health Check.
Configure the System Health Check task first and then run the P4000 Family Configuration
Collection task. For example, if the P4000 Family Configuration Collection runs at 7:30 a.m.,
configure the System Health Check task to run at approximately 5:00 a.m. so that the System
Health Check task has two hours to complete before the P4000 Family Configuration Collection
task starts.
12. Run the configuration collection by selecting Options → Status Polling → HP Service P4000
Family Configuration Collection. Click Add Targets to select your systems, and then click the
Run Now button.
HP Insight Remote Support Advanced (A.05.70)Page 153 of 199