A.05.70 HP Insight Remote Support Advanced Managed Systems Configuration Guide (October 2011, 5900-1726)
Managed Systems Configuration Guide
Chapter 17: P4000 Storage Systems Migration Procedure
Important: You will need to fix any status items that are not green before going to the next
steps.
Once you complete these tasks, each the node should be listed in the HP SIM left panel under
Insight Remote Support Services, System is Remote Support Eligible and System is Remote
Support Enabled. This list can take a few minutes to update.
Repeat steps 7 and 8 for each new P4000 Storage System added to the Remote Support eligible
systems list.
9. From HP SIM, add the P4000 Storage System collection credentials to Remote Support as follows:
a. Options → Remote Support Configuration and Services.
b. Select the Storage Services tab and then select the P4000 Family Configuration Collections
tab.
c. Select New Credential Group button.
HP recommends that users create one or more credential groups for devices:
o
One for the SAN/iQ protocol name with credentials that match the Management Group
credentials.
o
One for each management group, and associate it with the proper devices.
o
One for devices not in a management group, and associate it with the proper devices.
d. Enter the Description, UserName and Password. These credentials are the Username and
Password when the Management Group was created in CMC.
Note: The SU User, SU Pass, SNMP Read, and SNMP Write fields are not required for
P4000 Family Configuration Collections or real time event logging.
e. In the device list, edit each P4000 Storage System so that the Cred Group uses the credential
group created in the previous step. Note that the Connection type should be SANIQ for each
P4000 Storage System, and Type should be shown as P4000.
f. Test the connection to each P4000 Storage System by selecting the Test button on the right side.
The text of this button will change to "running" while it checks the credentials. Once the test
completes, the Test button's text color will change to green if the connection succeeded and red
HP Insight Remote Support Advanced (A.05.70)Page 152 of 199