A.05.70 HP Insight Remote Support Advanced Managed Systems Configuration Guide (October 2011, 5900-1726)

Managed Systems Configuration Guide
Chapter 16: Enterprise Virtual Array Configuration
3. Enter the IP address for the SMS node (Port 5989 is the default port for SMI-S).
4. For the Interop Namespace designation use root/PG_InterOP; the User Name should be
administrator; default Password should be administrator. If you used cimuser to create a
different username/password use those values instead.
This step changes for Command View EVA 8. The Interop Namespace designation is interop and
the User Name and Password credentials are the same as the Command View EVA login.
Figure 15.13. SMI-S Test Tool (CV 8)
The figure below shows successful output in the command window from which the wbemdisco command
was executed:
Figure 15.14. wbemdisco output
HP Insight Remote Support Advanced (A.05.70)Page 130 of 199