A.05.70 HP Insight Remote Support Advanced Managed Systems Configuration Guide (October 2011, 5900-1726)

Managed Systems Configuration Guide
Chapter 16: Enterprise Virtual Array Configuration
3. Save the file.
4. Restart the HP SIM service.
Re-identify all WBEM/WMI systems in HP SIM to correct the port references by selecting Options
→ Identify Systems.
Installing and Configuring Command View EVA After
HP SIM
The Command View EVA installation kit includes SMI-S as a component. At installation time only, SMI-S
assigns two ports. The default ports SMI-S will assign if they are available are:
l http port=5988
l https port=5989
If one or both of these ports are in use, the installation will provide an additional configuration screen that
allows the port numbers to be changed. The SMI-S installer will suggest port 60000 if it is not in use. SMI-
S will retain port 5988 if it there is no conflict. These are the ports that SMI-S will use when the process HP
StorageWorks CIM Object Manager starts.
HP Insight Remote Support Advanced (A.05.70)Page 109 of 199