A.05.70 HP Insight Remote Support Advanced HP StorageWorks P4000 Storage System Migration Guide (October 2011, 5900-1528)

NOTE: When using Insight Remote Support version A.05.70 install CMC version 9.5. CMC 9.5 supports
both SAN/iQ 8.5, 9.0 and 9.5 nodes and Management Groups.
1. Insert the HP StorageWorks Management DVD in the DVD drive. The installer should launch automatically.
Or, navigate to the executable (:\GUI\Windows\Disk1\InstData\VM\CMC_Installer.exe)
Or download CMC at the following URL: www.hp.com/go/P4000downloads.
Select the Complete install option, which is recommended for users that use SNMP.
NOTE: If you already have Service Console installed, you don't need to disable it. Insight Remote
Support can co-exist with Service Console without conflict.
2. Use the Find Nodes wizard to discover the storage systems on the network, using either IP addresses
or host names, or by using the subnet and gateway mask of the storage network.
The found storage systems appear in the available category in the CMC.
1.2 Installing/Upgrading CMC on the CMS 9