A.05.70 HP Insight Remote Support Advanced HP StorageWorks P4000 Storage System Migration Guide (October 2011, 5900-1528)

c. Create a new user. First select the group you created in the previous step, then go to
Administrative Tasks → New User. Enter the User Name, Password, and click the Add button
to add this user to the read only user group you created.
1.4 Installing and Configuring Insight Remote Support Advanced
NOTE: Please note that the following procedure does not detail every step in the installation procedure. It
only highlights the steps necessary to successfully manage P4000 Storage Systems with Insight Remote
Support Advanced. For the complete installation procedure please refer to the HP Insight Remote Support
Advanced CMS Configuration and Usage Guide .
IMPORTANT: Only SAN/iQ 8.5, 9.0 and 9.5 nodes in a Management Group can be monitored with
Insight Remote Support versions A.05.60 and A.05.70. HP recommends that all P4000 nodes be in a
Management Group before installing Insight Remote Support. Insight Remote Support configuration collections
won't be gathered if the node is not in a Management Group.
1. Install HP SIM. Accept all defaults.
2. Once the HP SIM installation completes, run the HP SIM First Time Wizard.
a. On the Credentials page, add public as the Read community string in the SNMP Credentials
section.
1.4 Installing and Configuring Insight Remote Support Advanced 17