A.05.70 HP Insight Remote Support Advanced HP StorageWorks P4000 Storage System Migration Guide (October 2011, 5900-1528)

NOTE: SAN/iQ 8.5, 9.0 and 9.5 ship by default with traps set for all alert cases.
4. Add the CMS IP address to the P4000 Storage System's SNMP trap send list. The CMS IP address is
needed to configure SNMP traps on each storage system. Note that in CMC 9.5, SNMP traps are
configured at the Management Group level, not at the node level.
a. Select SNMP in the left menu tree and open the SNMP Traps tab.
b. Open the Edit SNMP Traps dialog by browsing to SNMP Trap Tasks → Edit SNMP Traps.
c. In the Edit SNMP Traps dialog, click Add.
d. In the Add IP or Hostname dialog, enter the IP address or hostname into the IP or Hostname
field. Verify that the Trap Version is v1, and click OK.
1.3 Configuring the P4000 Storage Systems 15