A.05.70 HP Insight Remote Support Advanced Central Management Server Configuration Guide (October 2011, 5900-1725)

Central Management Server Configuration Guide
Chapter 4: Configuring Information for Managed Systems
7. Click Apply. The Verify Target Systems page is displayed, which allows you to review the target
systems that you have selected. To add more targets, click Add Targets. To remove a target, select
the check box associated with it and click Remove Targets.
8. Verify the list of systems is correct.
If the list is correct, click Next. The Set System Properties page will display.
9. Scroll down to the Contract and Warranty Information section of the page.
Caution: The System Information fields at the top of the page (shown in the figure below)
should not be changed since doing so may change whether the system is part of the Remote
Support System List and hence may affect the ability to obtain Remote Support for that system.
The Serial number and Product number should not be changed in the System
Information section. Instead, use the Customer-Entered fields in the Contract and Warranty
Information section further down the page when information needs to be updated.
HP Insight Remote Support Advanced (A.05.70)Page 52 of 110