HP Insight Management WBEM Smart Array Provider for Linux Datasheet

CIM_StorageExtent
Block size in bytes
BlockSize
Total number of blocks on disk drive
ConsumableBlocks
This will indicate extended status for the disk drive
ExtentStatus[0]
Possible values:
2 (None)
11 (Rebuild – disk drive is currently rebuilding data)
Total number of blocks on disk drive
NumberOfBlocks
Set to TruePrimordial
Total service hours reported disk drive
TotalPowerOnHours
HPSA_StorageExtent
SMX_SADiskDriveFirmware Class
The SMX_SADiskDriveFirmware class implements the HPSA_DiskDriveFirmware class
and represents the firmware installed on a disk drive. There is one instance per disk drive.
The following table lists the properties implemented.
Property ImplementationProperty Name
CIM_ManagedElement
TargetType valueElementName
CIM_ManagedSystemElement
Disk Drive FirmwareName
CIM_LogicalElement
Disk Drive FirmwareCaption
Disk Drive FirmwareDescription
CIM_SoftwareIdentity
Disk Drive FirmwareClassificationDescriptions[0]
10 (Firmware)Classifications[0]
Opaque key
InstanceID
Disk drive vendor string
Manufacturer
CIM:SoftwareFamilyIdentityInfoType
HPQ:<TargetType value>IdentityInfoValue
Drive firmware as reported from SCSI identify command
VersionString
HPSA_DiskDriveFirmware
SMX_SAPhysicalPackage Class
The SMX_SAPhysicalPackage class implements the HPSA_PhysicalPackage class and
represents the overall physical package for the array system as a whole. There is one instance
per HBA or Storage Subsystem.
Using the Provider 11