HP Insight Management WBEM Providers 9.5 for Microsoft Windows Data Sheet

Table 7-8 Class: HP_MemoryRedundancySet
Pro
p
ert
y
name Pro
p
ert
y
im
p
lementation
TypeOfSet The type of redundancy currently in operation for the
Advanced Memory Protection system..
TypeOfSet contains the current type of redundancy:
 1 (Other), when the system is operating in
Advanced ECC mode or Lockstep mode
 2 (N+1), when the system is operating in RAID
(XOR) mode
 3 (Load Balanced), when the system is operating in
Mirrored mode
 4 (Sparing), when the system is operating in Online
Spare mode
OtherTypeOfSet OtherTypeOfSet contains the type of redundancy when
the corresponding property TypeOfSet contains 1
(Other). In this case, the property will contain the value
Advanced ECC or Lockstep, otherwise the property is
not populated.
LoadBalanceAlgorithm 2 (No Load Balancing)
RedundancyStatus The current memory redundancy status as follows:
 2 (Fully Redundant)—System is operating properly
in the Advanced Memory Protection mode given in
the CurrentConfigurations property.
 3 (Degraded Redundancy)— System is operating in
the CurrentConfigurations mode but memory
module(s) have correctable errors exceeding the
condition for pre-failure warranty.
○
HP_MemoryRedundancySet
OperatingSpeed The Maximum operating speed of the advanced
memory protection subsystem in MHz
AvailableMemory The size of the memory as seen by the operating
system in MB
TotalMemory Total size of memory as seen by the operating system
and memory used for advanced memory protection
configurations in MB