HP Insight Management WBEM Providers 9.3 for Microsoft Windows Data Sheet

Table 1-4 Class: HP_MemoryModule
Property name
Property implementation
Spd An array that contains raw Serial Presence Detect
information for the memory module. Each array
element contains a byte of the Spd.
This property is conditional; it is populated if the data
is available.
Type A numeric value idicating the presense of a HP Smart
Memory module.
0 (Unknown)
1 (Other)
2 (HP DIMM)
MinimumVoltage
This value specifies the minimum voltage needed
for the memory module to operate in millivolts. If
this value cannot be determined, then a value of
0 will be returned.
Ranks
The number of physical ranks on the module
Technology
Technology type of the memory module
Table 1-5
Memory Module Status
Condition OperationalStatus[0]
StatusDescriptions[0]
OperationalStatus[1]
StatusDescriptions[1]
Memory module status is unknown
•
0 (Unknown)
•
Memory module status:
Unknown
•
<not populated>
•
<not populated>
Memory module is operating
properly
•
2 (OK)
• Memory module status: OK
•
<not populated>
• <not populated>
Memory module is present but is not
currently used by the operating
system
•
2 (OK)
•
Memory module status: OK
•
15 (Dormant)
•
Memory module status: Memory
present but not in use
Memory module has correctable
errors exceeding the condition for
pre-failure warranty
•
3 (Degraded)
•
Memory module status:
Degraded
•
5 (Predictive Failure)
•
Memory module status:
Correctable error threshold for
pre-failure warranty has been
exceeded
7-4-4 HP_MemoryBoard
The class HP_MemoryBoard represents a physical memory board on ProLiant Servers. There is an
instance of this class for each memory board present in the system. Empty memory board slots are not
instantiated.