HP Insight Management WBEM Providers 9.2.5 for Microsoft® Windows® Data Sheet

Table 2-4 Class: HP_PowerRedundancySet
Property name
Property implementation
ElementName Power Redundancy Set n, where n represents the
number of the redundancy set instance
CIM_SystemSpecificCollection
InstanceID
Unique identifier for this power redundancy instance
CIM_RedundancySet
MaxNumberSupported The maximum number of power supplies supported for
this redundancy set
MinNumberNeeded The minimum number of power supplies needed to
function
TypeOfSet
3 (Load Balanced)
LoadBalanceAlgorithm
0 (Unknown)
RedundancyStatus
•
0 (Unknown)—If the redundancy status is unknown
•
2 (Fully Redundant)—If the all power supplies in the
set are operating properly and enough to achieve
redundancy
•
3 (Degraded Redundancy)—If there are at least
enough power supplies for the redundancy set to
provide power, but power supplies have failed
•
4 (Redundancy Lost)—If there are not enough
power supplies required to achieve redundancy,
but there are enough for the redundancy set to
provide power
•
5 (Overall Failure)—If there are not enough power
supplies operating properly for the redundancy set
to provide power.
4-3-4 HP_MemberOfPowerRedundancy
HP_MemberOfPowerRedundancy is used to represent an association between HP_PowerSupply and
HP_PowerRedundancySet. The Windows® implementation class is
HP_WinMemberOfPowerRedundancy.
Table 2-5 Class: HP_MemberOfPowerRedundancy
Property name
Property implementation
Collection
References HP_PowerRedundancySet
Included Writeable boolean property indicating if the power
supply instance referenced by Member will contribute
status to the HP_PowerCollection.
•
TRUE: Include member status in collection status
•
FALSE: Do not include member status in collection
status