HP Insight Management WBEM Providers 9.2.5 for Microsoft® Windows® Data Sheet

Contents 149
Table 2-2
Class: HP_NumericSensor
Property name
Property implementation
RequestedState
12 (Not Applicable)
CIM_Sensor
SensorType
2 (Temperature)
CurrentState
•
Normal—If OperationalStatus[0] is 2 (OK)
• Critical—If OperationalStatus[0] is 6 (Error)
PossibleStates Array can contain any of the following values:
•
Normal
• Critical
CIM_NumericSensor
CurrentReading
Current reading of temperature sensor
BaseUnits
2 (Degrees C)
RateUnits
0 (None)
UnitModifier
0
SupportedThresholds
•
SupportedThresholds[0] = 1
(UpperThresholdNotCritical) if the system will set
fans to full speed if the threshold is crossed
•
SupportedThresholds[0] = 3
(UpperThresholdCritical) set if the system will
gracefully attempt to shutdown the system if the
threshold is crossed
•
SupportedThresholds[0] = 5 (UpperThresholdFatal)
if the system will immediately power down the
system if the threshold is crossed
SettableThresholds
<empty>
UpperThresholdNonCritical Contains the threshold temperature that
CurrentReading must exceed to be in a non-critical
state. This is only set if the system will set fans to full
speed if the threshold is crossed.
UpperThresholdCritical Contains the threshold temperature that
CurrentReading must exceed to be in a critical state.
This is only set if the system will gracefully attempt to
shutdown the system if the threshold is crossed.
UpperThresholdFatal Contains the threshold temperature that
CurrentReading must exceed to be fatal. This is only set
if the system will immediately power down the system if
the threshold is crossed.
HP_NumericSensor
NumericSensorType Enumeration describing the type of temperature sensor.
Refer to MOF.