HP Insight Management WBEM Providers 9.0 for Windows Server 2003 and Windows Server 2008 Data Sheet

Table 10-2 Class: HP_ManagementProcessor
Property name
Property implementation
NICCondition Enumerator indicating the condition of the MP-resident
network interface connection (see the
HPWmiMgmtProcLite.mof file).
•
0 (Unknown)
•
2 (OK)
•
3 (NIC disabled)
•
4 (NIC not in operation-alternate host NIC in use)
•
5 (NIC in operation but disconnected)
6 (Failed)
ActiveLicense The currently active iLO license type:
•
0 (Unknown)
•
1 (None)
•
2 (iLO Advanced)
•
3 (iLO Light)
•
4 (iLO Advanced for BladeSystem)
•
5 (iLO Standard for BladeSystem)
LicenseKey The iLO license (if any)
Table 10-3 Implemented Methods for HP_ManagementProcessor Class
Method name
Method implementation
RequestStateChange Method parameters:
•
RequestedState—Input parameter of the new state
requested. Supported value is Reset(11)
•
ManagedElement—Input parameter with the
reference to the HP_ManagementProcessor instance
for the state change
•
The Time, Job and TimeoutPeriod parameters are
not supported and should be zero or NULL.
•
ModelCorrespondence—
CIM_EnabledLogicalElement.RequestedState
9-3-2 CIM_SoftwareIdentity
CIM_SoftwareIdentity describes management processor firmware. The Windows®-specfic
implementation class is HP_MPFirmware. The following properties are implemented.
Table 10-4 Class: CIM_SoftwareIdentity
Property name
Property implementation
CIM_ManagedElement