HP Insight Management WBEM Providers 9.0 for Windows Server 2003 and Windows Server 2008 Data Sheet

Hardware Plat form Scenario 1: Memory Modules reside on System Board
Memory
Module
(DIMM)
Memory
Module
Connector
(Slot)
Chassis
plugs into resides on
Example Instance Diagram
HP_SystemMemoryModuleSlot
HP_MemoryModuleInSlot
HP_Computer
SystemChassis
Chassis 1
DIMM 0-2
HP_Memory
Module
DIMM 0-1
(empty)
DIMM Slot 0-4
(empty)
DIMM Slot 0-3
DIMM Slot 0-2
HP_Memory
ModuleSlot
DIMM Slot 0-1
7-3-2 Memory containment hierarchy—scenario 2
The following diagrams show the memory providers containment hierarchy for a ProLiant server
platform where all memory is located on memory boards (there is no memory on the system board).
In the following example, there are four memory board slots (two are occupied by memory boards,
two are empty). Each memory board contains four memory module slots. Board Slot 1 is populated by
Board 1, which has two occupied memory module slots occupied and two empty slots. Board Slot 2 is
populated by Board 2, which is unpopulated by memory modules. Board Slots 3 and 4 are not
populated by memory boards.
The following example does not depict any specific ProLiant model.
NOTE: DIMM numbering is shown in all subsequent descriptions in this document in format x-y,
where x is the board and cartridge number and y is the memory module slot and socket number.
The system board has a number of 0 consistent with ProLiant tradition.