HP Insight Management WBEM Providers 2.8 for Windows Server 2003 and Windows Server 2008 Data Sheet

Table 7-8 Class: HP_MemoryRedundancySet
Property name Property implementation
ElementName Memory Redundancy Set
CIM_SystemSpecificCollection
InstanceID HPQ:HP_MemoryRedundancySet:001
CIM_RedundancySet
TypeOfSet The type of redundancy currently in operation for the
Advanced Memory Protection system. This property
corresponds functionally to the property
CurrentConfiguration.
TypeOfSet[0] contains the current type of redundancy:
 1 (Other), when the system is operating in
Advanced ECC mode
 2 (N+1), when the system is operating in RAID
(XOR) mode
 3 (Load Balanced), when the system is operating in
Mirrored mode
 4 (Sparing), when the system is operating in Online
Spare mode
OtherTypeOfSet OtherTypeOfSet[0] contains the type of redundancy
when the property TypeOfSet[0] = 1 (Other). In this
case, the property will contain the value Advanced ECC
or Lockstep, otherwise the property is not populated.
LoadBalanceAlgorithm 2 (No Load Balancing)
RedundancyStatus The current memory redundancy status as follows:
 2 (Fully Redundant)—System is operating properly
in the Advanced Memory Protection mode given in
the TargetConfiguration property.
 3 (Degraded Redundancy)—Degraded
Redundancy can occur in either of 2 conditions:
○ System is not operating in the
TargetConfiguration mode (the
CurrentConfiguration mode does not match the
TargetConfiguration mode).
○ System is operating in the TargetConfiguration
mode but memory module(s) have correctable
errors exceeding the condition for pre-failure
warranty.
HP_MemoryRedundancySet
OperatingSpeed The current operating speed of the advanced memory
protection subsystem in MHz
AvailableMemory The size of the memory as seen by the operating
system in MB
TotalMemory Total size of memory as seen by the operating system
and memory used for advanced memory protection
configurations in MB